ABS (wiki detail) on Anycubic Kobra 3 Max

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Anycubic

Filament type

ABS (wiki detail)

Slicer

Anycubic Slicer Next / Orca

Nozzle size

0.4 mm

Nozzle temp

240-280 °C

Bed temp

80-100 °C

Speed

50-150 mm/s

Cooling

Cooling time ~6 s

Notes

Anycubic wiki ABS range (wider than older summary). Max volumetric 15 mm³/s. Enclosure strongly recommended.

Source: Anycubic Wiki · 2025-07-25

Summarized from the linked source. Always test on scrap before production runs.