PPA-CF/GF on Bambu Lab H2S

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab H2S

Filament brand

Bambu Lab

Filament type

PPA-CF/GF

Slicer

Bambu Studio

Nozzle size

0.6 mm hardened

Nozzle temp

285-320 °C

Bed temp

100-120 °C

Chamber / enclosure

Enclosed recommended

Notes

Engineering. 0.6 hardened preferred. Dry mandatory. Enclosed.

Source: Bambu Lab Wiki · 2026-10-13

Summarized from the linked source. Always test on scrap before production runs.