Support for PA/PET on Bambu Lab H2S

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab H2S

Filament brand

Bambu Lab

Filament type

Support for PA/PET

Slicer

Bambu Studio

Nozzle size

0.6 mm hardened

Nozzle temp

260-300 °C

Bed temp

90-110 °C

Chamber / enclosure

Enclosed recommended

Notes

Hardened preferred. Dry required.

Source: Bambu Lab Wiki · 2026-10-13

Summarized from the linked source. Always test on scrap before production runs.