Bambu Lab A1 / PLA Glow

PLA Glow on Bambu Lab A1

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab A1

Filament brand

Bambu Lab

Filament type

PLA Glow

Slicer

Bambu Studio

Nozzle size

0.4 mm hardened

Nozzle temp

210-240 °C

Bed temp

35-65 °C

Notes

Hardened nozzle required. AMS not recommended (abrasive/brittle).

Source: Bambu Lab Wiki · 2026-10-13

Summarized from the linked source. Always test on scrap before production runs.