PLA on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

SUNLU

Filament type

PLA

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

200-230 °C

Bed temp

50-65 °C

Speed

50-100 mm/s

Notes

Official SUNLU PLA recommend settings from large-spool product page. Adjust per printer.

Source: SUNLU · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.