Any (brand filament profile): print settings

23 sourced settings for this printer.

Looking for this printer? Find Any (brand filament profile) on Amazon (affiliate link).

Showing 23 of 23 settings

official

PLA

Any (brand filament profile) · SUNLU
Nozzle 200-230 °CBed 50-65 °CSpeed 50-100 mm/s0.4 mm
Official SUNLU PLA recommend settings from large-spool product page. Adjust per printer.
See full settings →
official

PLA+

Any (brand filament profile) · SUNLU
Nozzle 210-235 °CBed 55-65 °C0.4 mm
Official SUNLU PLA+ recommend settings (nozzle/bed) from large-spool product page.
See full settings →
official

PETG

Any (brand filament profile) · SUNLU
Nozzle 220-230 °CBed 60-70 °CSpeed 40-60 mm/s0.4 mm
Official SUNLU PETG recommend settings from large-spool product page (speed listed up to 40-600 mm/s; start c…
See full settings →
official

ABS

Any (brand filament profile) · SUNLU
Nozzle 250-260 °CBed 80-100 °CSpeed 40-60 mm/s0.4 mm
Official SUNLU ABS recommend settings including retraction 5 mm / 50 mm/s.
See full settings →
official

PLA Classic

Any (brand filament profile) · SUNLU
Nozzle 200-260 °CBed 50-60 °CSpeed ≤450 mm/s0.4 mm
Official SUNLU PLA Classic product parameters: nozzle 200-260°C / ≤450 mm/s; bed 50-60°C; retraction 0.8-1.2 …
See full settings →
official

PLA (standard product)

Any (brand filament profile) · SUNLU
Nozzle 200-210 °C (50-…Bed 50-60 °CSpeed 50-200 mm/s0.4 mm
Official SUNLU PLA product page speed-banded nozzle temps; bed 50-60°C; retraction 0.8-1.2 mm @ 30-40 mm/s.
See full settings →
official

High Speed Matte PETG

Any (brand filament profile) · SUNLU
Nozzle 240-260 °CBed 60-70 °CSpeed ≤400 mm/s0.4 mm
Official SUNLU High Speed Matte PETG TDS: nozzle 240-260°C, bed 60-70°C, fan on, retraction 0.8-1.2 mm @ 30-4…
See full settings →
official

PolyLite PLA

Any (brand filament profile) · Polymaker
Nozzle 190-230 °CBed 25-60 °CSpeed 50-200 mm/s0.4 mm
Official Polymaker Wiki PolyLite PLA: cooling ON, chamber not needed, dry 55°C for 6h if wet. Based on 0.4 mm…
See full settings →
official

PolyLite PLA

Any (brand filament profile) · Polymaker
Nozzle 190-230 °CBed 25-60 °CSpeed 40-60 mm/s0.4 mm
Polymaker shop PolyLite PLA print settings (slower 40-60 mm/s band). Dry 55°C / 6h if needed.
See full settings →
official

PolyTerra PLA

Any (brand filament profile) · Polymaker
Nozzle 190-230 °CBed 25-50 °CSpeed 50-300 mm/s0.4 mm
Official PolyTerra PLA TDS V6.0 (2026-06-08): nozzle 190-230°C, bed 25-50°C, speed 50-300 mm/s, cooling ON, d…
See full settings →
official

PolyLite PLA Pro

Any (brand filament profile) · Polymaker
Nozzle 190-220 °CBed 30-60 °CSpeed 30-70 mm/s0.4 mm
Official PolyLite PLA Pro PIS: nozzle 190-220°C, bed 30-60°C, speed 30-70 mm/s, fan ON.
See full settings →
official

PLA+

Any (brand filament profile) · eSUN
Nozzle 210-230 °CBed 45-60 °CSpeed <300 mm/s0.4 mm
Official eSUN PLA+ product parameters: extruder 210-230°C, bed 45-60°C, fan 100%, high-speed printer <300 mm/…
See full settings →
official

PETG

Any (brand filament profile) · eSUN
Nozzle 240-260 °CBed 75-90 °CSpeed <150 mm/s0.4 mm
Official eSUN PETG product parameters: extruder 240-260°C, bed 75-90°C, fan 100%, <150 mm/s on high-speed pri…
See full settings →
official

PLA Basic

Any (brand filament profile) · Overture
Nozzle 190-220 °CBed 25-60 °CSpeed <300 mm/s0.4 mm
Official Overture 3D Wiki cheat sheet. Dry 50°C / 7h. Easy-print eco PLA.
See full settings →
official

PLA Pro

Any (brand filament profile) · Overture
Nozzle 190-220 °CBed 25-60 °CSpeed <70 mm/s0.4 mm
Official Overture cheat sheet: prints slower than standard PLA; at 15 mm³/s raise nozzle to 220°C. Dry 50°C /…
See full settings →
official

Silk PLA

Any (brand filament profile) · Overture
Nozzle 200-220 °CBed 50-60 °CSpeed <70 mm/s0.4 mm
Official Overture cheat sheet: print slower for best shine; slight nozzle increase improves gloss. Dry 50°C /…
See full settings →
official

Matte PLA

Any (brand filament profile) · Overture
Nozzle 190-230 °CBed 50-70 °CSpeed <300 mm/s0.4 mm
Official Overture cheat sheet: slightly abrasive — hardened nozzle recommended for long-term use. Dry 50°C / …
See full settings →
official

Rock PLA

Any (brand filament profile) · Overture
Nozzle 190-230 °CBed 50-70 °CSpeed <300 mm/s0.4 mm
Official Overture cheat sheet: marble-like texture; 0.4 mm+ nozzle recommended to reduce clogging. Dry 50°C /…
See full settings →
official

Super PLA+

Any (brand filament profile) · Overture
Nozzle 190-230 °CBed 25-60 °CSpeed <60 mm/s0.4 mm
Official Overture cheat sheet: best with 0.2 mm nozzle; at 15 mm³/s raise nozzle to 220-230°C. Dry 50°C / 7h.
See full settings →
official

Easy PLA

Any (brand filament profile) · Overture
Nozzle 190-220 °CBed 25-60 °CSpeed <90 mm/s0.4 mm
Official Overture cheat sheet budget PLA; use standard PLA settings. Dry 50°C / 7h.
See full settings →
official

PETG

Any (brand filament profile) · Overture
Nozzle 230-260 °CBed 65-70 °CSpeed <300 mm/s0.4 mm
Official Overture cheat sheet: keep dry; dry 60°C / 5h if popping/cracking.
See full settings →
official

TPU 95A

Any (brand filament profile) · Overture
Nozzle 210-230 °CBed 25-60 °CSpeed <40 mm/s0.4 mm
Official Overture cheat sheet: do not use with AMS; minimal/no retraction; slow speeds required. Dry 70°C / 7…
See full settings →
official

High Speed TPU

Any (brand filament profile) · Overture
Nozzle 200-240 °CBed 25-60 °CSpeed <90 mm/s0.4 mm
Official Overture cheat sheet: flexible TPU optimized for faster printing. Dry per sheet (7h).
See full settings →