PolyLite PLA on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

PolyLite PLA

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

190-230 °C

Bed temp

25-60 °C

Speed

50-200 mm/s

Retraction

1-3 mm @ 20-40 mm/s

Cooling

Notes

Official Polymaker Wiki PolyLite PLA: cooling ON, chamber not needed, dry 55°C for 6h if wet. Based on 0.4 mm nozzle.

Source: Polymaker Wiki · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.