TPU 95A on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Overture

Filament type

TPU 95A

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

210-230 °C

Bed temp

25-60 °C

Speed

<40 mm/s

Retraction

Minimal or none

Notes

Official Overture cheat sheet: do not use with AMS; minimal/no retraction; slow speeds required. Dry 70°C / 7h.

Source: Overture 3D Wiki · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.