PLA Pro on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Overture

Filament type

PLA Pro

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

190-220 °C

Bed temp

25-60 °C

Speed

<70 mm/s

Notes

Official Overture cheat sheet: prints slower than standard PLA; at 15 mm³/s raise nozzle to 220°C. Dry 50°C / 7h.

Source: Overture 3D Wiki · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.