PETG on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Overture

Filament type

PETG

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

230-260 °C

Bed temp

65-70 °C

Speed

<300 mm/s

Notes

Official Overture cheat sheet: keep dry; dry 60°C / 5h if popping/cracking.

Source: Overture 3D Wiki · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.