PETG on Any (brand filament profile)

blog

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Hatchbox

Filament type

PETG

Slicer

Any

Nozzle temp

230-250 °C (start 240)

Bed temp

70-90 °C (start 80)

Speed

30-60 mm/s

Cooling

30-50%

Notes

Reviewer starting settings for Hatchbox PETG. Full fan causes delamination. PEI preferred.

Source: CheapSpool · 2026

Summarized from the linked source. Always test on scrap before production runs.