ABS on Any (brand filament profile)

blog

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Hatchbox

Filament type

ABS

Slicer

Any

Nozzle temp

225-245 °C (start 235)

Bed temp

100-110 °C

Speed

30-50 mm/s

Cooling

Off

Notes

Reviewer starting settings for Hatchbox ABS. Enclosure required; ventilate. PEI or Kapton.

Source: CheapSpool · 2026

Summarized from the linked source. Always test on scrap before production runs.