Any (brand filament profile) / PolyFlex TPU95

PolyFlex TPU95 on Any (brand filament profile)

official
Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
Any (brand filament profile)
Filament brand
Polymaker
Filament type
PolyFlex TPU95
Slicer
OrcaSlicer / Bambu Studio / PrusaSlicer
Nozzle size
0.4 mm
Nozzle temp
210-230 °C
Bed temp
25-60 °C
Speed
20-40 mm/s
Layer height
0.1 mm
Cooling
ON
Notes
Official PolyFlex TPU95 PIS: nozzle 210-230°C, bed 25-60°C, speed 20-40 mm/s, fan ON, layer 0.1 mm. Slightly increase extrusion multiplier (+0.05). Dry 70°C/12h.
Source: Polymaker · 2026-11-05
Summarized from the linked source. Always test on scrap before production runs.