PET-CF on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Elegoo

Filament type

PET-CF

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer / Cura

Nozzle size

0.4–0.8 mm

Nozzle temp

260-290 °C

Bed temp

80-100 °C

Chamber / enclosure

45-60 °C

Speed

<100 mm/s

Notes

Official ELEGOO PET-CF TDS: dry 80°C/8h; nozzle 260-290°C (typical test 270°C); bed 80-100°C (typical 100°C); chamber 45-60°C; speed <100 mm/s (test 100 mm/s); hardened nozzle recommended.

Source: ELEGOO TDS · 2025

Summarized from the linked source. Always test on scrap before production runs.