PETG-CF on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Elegoo

Filament type

PETG-CF

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer / Cura

Nozzle size

0.4–0.8 mm

Nozzle temp

240-270 °C

Bed temp

65-75 °C

Chamber / enclosure

25-50 °C

Speed

<220 mm/s

Notes

Official ELEGOO PETG-CF TDS: dry 60°C/8h; nozzle 240-270°C (typical 255°C); bed 65-75°C (typical 70°C); chamber 25-50°C; speed <220 mm/s (typical 150 mm/s); hardened nozzle.

Source: ELEGOO TDS · 2025

Summarized from the linked source. Always test on scrap before production runs.