PETG Pro on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Elegoo

Filament type

PETG Pro

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer / Cura

Nozzle size

0.2–0.8 mm

Nozzle temp

230-260 °C

Bed temp

65-75 °C

Chamber / enclosure

25-50 °C

Speed

<270 mm/s

Notes

Official ELEGOO PETG PRO TDS: dry 60°C/8h; nozzle 230-260°C (typical 255°C); bed 65-75°C (typical 70°C); chamber 25-50°C; speed <270 mm/s (typical 150 mm/s).

Source: ELEGOO TDS · 2025

Summarized from the linked source. Always test on scrap before production runs.