Any (brand filament profile) / PolyMax PC

PolyMax PC on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

PolyMax PC

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

250–270 °C

Bed temp

90–105 °C

Chamber / enclosure

Enclosed; ≥70 °C chamber recommended

Speed

50–200 mm/s (summary card max 50 mm/s)

Retraction

1–3 mm @ 20–40 mm/s

Cooling

OFF

Notes

Official Polymaker PolyMax PC product page: nozzle 250–270°C, bed 90–105°C, fan OFF, retraction 1–3 mm at 20–40 mm/s (direct and indirect). Dry 75°C / 6 h if wet; anneal 90°C / 2 h. Enclosed printer required; actively heated chamber ≥70°C highly recommended. Page print-settings block lists speed 50–200 mm/s; the summary card lists max 50 mm/s.

Source: Polymaker

Summarized from the linked source. Always test on scrap before production runs.