PolyLite PC on Any (brand filament profile)
officialTest on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
Any (brand filament profile)
Filament brand
Polymaker
Filament type
PolyLite PC
Slicer
OrcaSlicer / Bambu Studio / PrusaSlicer
Nozzle size
0.4 mm
Nozzle temp
250–270 °C
Bed temp
90–105 °C
Chamber / enclosure
Enclosed; ≥60 °C chamber recommended
Speed
30–50 mm/s
Retraction
DD 1 mm @ 20 mm/s; ID 3 mm @ 40 mm/s
Cooling
OFF
Notes
Official Polymaker PolyLite PC product page: nozzle 250–270°C, bed 90–105°C, speed 30–50 mm/s, fan OFF. Direct-drive retraction 1 mm / 20 mm/s; indirect 3 mm / 40 mm/s. Dry 75°C / 12 h if wet; anneal 90°C / 2 h. All-metal hotend ≥250°C and enclosure required; heated chamber ≥60°C highly recommended.
Source: Polymaker