ABS on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Hatchbox

Filament type

ABS

Slicer

OrcaSlicer / Cura / PrusaSlicer

Nozzle size

1.75 mm filament

Nozzle temp

210–240 °C

Bed temp

80–100 °C

Chamber / enclosure

Temperature-controlled enclosure recommended

Notes

Official Hatchbox ABS material page: recommended extrusion 210–240°C, build platform 80–100°C; Kapton tape or hairspray for adhesion. Tips repeat 210–240 / 80–100 and note ABS slurry plus an enclosure to prevent lift and layer separation. Acetone-smoothable.

Source: HATCHBOX

Summarized from the linked source. Always test on scrap before production runs.