Creality K2 Plus / PETG (Generic, CR-PETG, Hyper PETG)

PETG (Generic, CR-PETG, Hyper PETG) on Creality K2 Plus

database

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Creality K2 Plus

Filament brand

Generic / Creality

Filament type

PETG (Generic, CR-PETG, Hyper PETG)

Slicer

Creality Print

Nozzle size

0.4 mm

Nozzle temp

Generic 250 °C; CR-PETG 240 °C; Hyper PETG 250 °C

Bed temp

70 °C (textured PEI, smooth PEI, cool plate)

Speed

max volumetric Generic 16 / CR-PETG 18 / Hyper PETG 23 mm³/s

Retraction

Generic 0.8 mm; CR-PETG and Hyper PETG 1.2 mm

Cooling

part fan 40–80%

Notes

Stock Creality Print PETG profiles for the K2 Plus (read from Creality Print v7.3.1). Engineering plate not supported for Generic PETG. Use glue stick on smooth PEI so PETG does not bond too hard.

Source: Preslice (from Creality Print v7.3.1 profiles) · 2026-11-05

Summarized from the linked source. Always test on scrap before production runs.