Creality K2 Plus: print settings

8 sourced settings for this printer.

Looking for this printer? Find Creality K2 Plus on Amazon (affiliate link).

Browse by filament

CR-PETG (1)CR-PLA / CR-PLA Fluo / CR-Wood / EN-PLA+ / CR-PLA Matte (1)CR-Silk (silk PLA) (1)Hyper PLA (1)PETG (Generic, CR-PETG, Hyper PETG) (1)PETG / PETG+HS / PETG-Basic / PETG-CF (1)PETG-CF (1)PLA (High Speed ST, Silk, Matte) (1)

Showing 8 of 8 settings

database

Hyper PLA

Creality K2 Plus · Creality
Nozzle 220 °CBed 50 °C (textured…Speed max volumetric …0.4 mm
Stock Creality Print Hyper PLA profile for the K2 Plus, as read by Preslice from Creality Print v7.3.1. Page …
See full settings →
database

CR-PLA / CR-PLA Fluo / CR-Wood / EN-PLA+ / CR-PLA Matte

Creality K2 Plus · Creality
Nozzle 220 °CBed 50 °CSpeed max volumetric …0.4 mm
Stock Creality Print profiles for the K2 Plus: CR-PLA, CR-PLA Fluo, CR-Wood and EN-PLA+ all 220/50 °C, 18 mm³…
See full settings →
database

CR-Silk (silk PLA)

Creality K2 Plus · Creality
Nozzle 220 °CBed 50 °CSpeed max volumetric …0.4 mm
Stock Creality Print CR-Silk profile for the K2 Plus caps flow much lower than regular PLA (10 vs 18–23 mm³/s…
See full settings →
database

PETG (Generic, CR-PETG, Hyper PETG)

Creality K2 Plus · Generic / Creality
Nozzle Generic 250 °C;…Bed 70 °C (textured…Speed max volumetric …0.4 mm
Stock Creality Print PETG profiles for the K2 Plus (read from Creality Print v7.3.1). Engineering plate not s…
See full settings →
database

PETG / PETG+HS / PETG-Basic / PETG-CF

Creality K2 Plus · eSun
Nozzle PETG, PETG+HS, …Bed 60 °C (PETG-CF …Speed max volumetric …0.4 mm
eSun PETG profiles that ship in Creality Print v7.3.1 for the K2 Plus. The 200 °C value for plain eSun PETG i…
See full settings →
community

PETG-CF

Creality K2 Plus · eSun
Nozzle 240 °CBed 75 °C
K2 Plus owner (Kris_Bee) in the Creality forum settings thread reports good prints with eSun PETG-CF at 240 °…
See full settings →
community

CR-PETG

Creality K2 Plus · Creality
Speed max volumetric …0.4 mm
Forum poster found stock CR-PETG (18 mm³/s in Creality Print 6.0.5.1840) clogged the nozzle by layer 2 on lar…
See full settings →
community

PLA (High Speed ST, Silk, Matte)

Creality K2 Plus · eSun
Nozzle 220 °CBed 50 °C (standard…0.4 mm harden…
Forum user prints all their eSun PLA, high-speed, silk and matte at 220 °C with the bed at 50 °C; lower temps…
See full settings →