CR-PETG on Creality K2 Plus

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Creality K2 Plus

Filament brand

Creality

Filament type

CR-PETG

Slicer

Creality Print 6.0.5

Nozzle size

0.4 mm

Speed

max volumetric 16 mm³/s (stock 18; 10 helped but still jammed once)

Layer height

first layer 0.24 mm (instead of 0.2 mm)

Notes

Forum poster found stock CR-PETG (18 mm³/s in Creality Print 6.0.5.1840) clogged the nozzle by layer 2 on large-base prints. Raising first layer height to 0.24 mm fixed the first layer and stopped jams, allowing max volumetric back up to 16 mm³/s.

Source: Creality Community Forum · 2025

Summarized from the linked source. Always test on scrap before production runs.