Creality K2 Plus / PLA (High Speed ST, Silk, Matte)

PLA (High Speed ST, Silk, Matte) on Creality K2 Plus

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Creality K2 Plus

Filament brand

eSun

Filament type

PLA (High Speed ST, Silk, Matte)

Slicer

Creality Print

Nozzle size

0.4 mm hardened steel

Nozzle temp

220 °C

Bed temp

50 °C (standard PEI)

Notes

Forum user prints all their eSun PLA, high-speed, silk and matte at 220 °C with the bed at 50 °C; lower temps hurt layer adhesion and speed on the K2 hardened steel nozzle even though the spool says 190–230 °C. Same user runs most PETG at 250–255 °C on the K2.

Source: Creality Community Forum · 2025

Summarized from the linked source. Always test on scrap before production runs.