Creality K2 Plus / PETG / PETG+HS / PETG-Basic / PETG-CF

PETG / PETG+HS / PETG-Basic / PETG-CF on Creality K2 Plus

database

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Creality K2 Plus

Filament brand

eSun

Filament type

PETG / PETG+HS / PETG-Basic / PETG-CF

Slicer

Creality Print

Nozzle size

0.4 mm

Nozzle temp

PETG, PETG+HS, PETG-Basic 200 °C; PETG-CF 255 °C

Bed temp

60 °C (PETG-CF 70 °C)

Speed

max volumetric PETG 5 / PETG+HS 7 / PETG-Basic 8 / PETG-CF 7 mm³/s

Retraction

0.8 mm

Cooling

part fan 35–100% (PETG-CF 40–80%)

Notes

eSun PETG profiles that ship in Creality Print v7.3.1 for the K2 Plus. The 200 °C value for plain eSun PETG is what the profile declares; it is unusually low, so check the spool range.

Source: Preslice (from Creality Print v7.3.1 profiles) · 2026-11-05

Summarized from the linked source. Always test on scrap before production runs.