PETG on Elegoo Centauri Carbon

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Elegoo Centauri Carbon

Filament brand

—

Filament type

PETG

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

240 °C

Bed temp

75 °C

Speed

same speed profile as PLA (outer 200 / inner 250 / infill 300 mm/s)

Layer height

0.2 mm

Retraction

0.8 mm @ 35 mm/s

Notes

Hark Tech Orca starting point for PETG on the Centauri Carbon. Pressure advance sits a little higher than PLA's 0.020–0.035.

Source: Hark Tech (Grant Harkness) · 2026-05-24

Summarized from the linked source. Always test on scrap before production runs.