Elegoo Centauri Carbon / PLA-CF / PETG-CF

PLA-CF / PETG-CF on Elegoo Centauri Carbon

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Elegoo Centauri Carbon

Filament brand

—

Filament type

PLA-CF / PETG-CF

Slicer

OrcaSlicer

Nozzle size

0.4 mm (hardened)

Nozzle temp

5 °C above the plain version (about 220 °C PLA-CF / 245 °C PETG-CF)

Bed temp

60 / 75 °C

Layer height

0.2 mm

Notes

Hark Tech: run carbon-filled PLA or PETG 5 °C hotter than the plain material. Watch for partial clogs and nozzle wear after a few kilos of abrasive filament.

Source: Hark Tech (Grant Harkness) · 2026-05-24

Summarized from the linked source. Always test on scrap before production runs.