Elegoo Centauri Carbon / Cooling — PLA / PETG / ABS

Cooling — PLA / PETG / ABS on Elegoo Centauri Carbon

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Elegoo Centauri Carbon

Filament brand

—

Filament type

Cooling — PLA / PETG / ABS

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Cooling

PLA 80–100%; PETG 30–40%; ABS 0–20%

Notes

orcaslicer.net: the Centauri's 5020 part-cooling blower is strong, too much for PETG and ABS. Upstream OrcaSlicer ships an official CC profile (resources/profiles/Elegoo/machine/ECC) for 0.2/0.4/0.6/0.8 mm nozzles plus about 20 bundled filament presets; run flow ratio and pressure-advance calibration on every new filament, even bundled Elegoo presets. The chamber is enclosed but not actively heated.

Source: orcaslicer.net (Jake Holloway) · 2026-06-21

Summarized from the linked source. Always test on scrap before production runs.