Elegoo Centauri Carbon / Any (process profile)

Any (process profile) on Elegoo Centauri Carbon

youtube

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Elegoo Centauri Carbon

Filament brand

—

Filament type

Any (process profile)

Slicer

ELEGOO Slicer

Nozzle size

0.4 mm

Speed

first layer 50 mm/s; outer wall 160, inner wall 200 mm/s; acceleration cut from about 10000 to 5000

Layer height

0.16 mm

Notes

CoshTech's 'perfect' CC profile: 3 wall loops, 6 top and 6 bottom shell layers, monotonic top, seam at back, ironing off. Infill gyroid ~8%, adaptive cubic 15% for flat parts, or honeycomb 10% as the most reliable. Slowed speeds and acceleration because the stock values shook the table. Supports on build plate only.

Source: CoshTech · 2025-11-10

Summarized from the linked source. Always test on scrap before production runs.