Matte PETG on Elegoo Centauri Carbon

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Elegoo Centauri Carbon

Filament brand

Build It Full

Filament type

Matte PETG

Slicer

ELEGOO Slicer / Orca (Generic PETG-CF profile)

Nozzle size

0.4 mm

Bed temp

50–60 °C textured PEI

Notes

Build It Full Matte PETG on the Centauri Carbon: flow ratio 0.82 (adjust 0.80–0.85). The bed must run cooler or Matte PETG sticks too firmly.

Source: Build It Full

Summarized from the linked source. Always test on scrap before production runs.