Any (brand filament profile) / Panchroma PLA

Panchroma PLA on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

Panchroma PLA

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

190–230 °C

Bed temp

25–60 °C (PC or textured PEI, glue when needed)

Chamber / enclosure

not needed

Speed

up to 350 mm/s; max volumetric 28 mm³/s

Retraction

1–3 mm @ 20–40 mm/s

Cooling

ON (full blast for best surface)

Notes

Polymaker wiki: Panchroma PLA (new high-speed formula). Silk and glossy colors should print slower to keep the shine. Dry 55 °C for 6 h only if it has absorbed moisture.

Source: Polymaker Wiki

Summarized from the linked source. Always test on scrap before production runs.