Any (brand filament profile) / Panchroma Silk PLA (formerly PolyLite Silk)

Panchroma Silk PLA (formerly PolyLite Silk) on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

Panchroma Silk PLA (formerly PolyLite Silk)

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

190–230 °C

Bed temp

25–60 °C (PC or textured PEI, glue when needed)

Chamber / enclosure

not needed

Speed

up to 250 mm/s; max volumetric 20 mm³/s

Retraction

1–3 mm @ 20–40 mm/s

Cooling

ON (full blast for best surface)

Notes

Polymaker wiki: New silk formula keeps its shine at 150 mm/s and resists clogging and brittleness. Dry 55 °C for 6 h only if it has absorbed moisture.

Source: Polymaker Wiki

Summarized from the linked source. Always test on scrap before production runs.