Any (brand filament profile) / Panchroma CoPE (co-polyester)

Panchroma CoPE (co-polyester) on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

Panchroma CoPE (co-polyester)

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

190–230 °C

Bed temp

25–60 °C; use adhesive (Magigoo / Vision Miner) on textured PEI, or a smooth PEI / PC / glass plate

Chamber / enclosure

not needed

Speed

up to 400 mm/s; max volumetric 32 mm³/s

Retraction

1–3 mm @ 20–40 mm/s

Cooling

ON (full blast)

Notes

Polymaker wiki: CoPE (formerly Panchroma Regular) is not a PLA. It sticks too hard to bare textured PEI, so let parts cool fully before removal. It does not bond with PLA, which makes it a clean breakaway support for PLA prints but rules out PLA multi-material parts.

Source: Polymaker Wiki

Summarized from the linked source. Always test on scrap before production runs.