PETG+ on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

eSUN

Filament type

PETG+

Slicer

Any

Nozzle temp

230–250 °C

Bed temp

75–90 °C

Speed

≤250 mm/s (high-speed)

Cooling

Fan 50–100%

Notes

eSUN official PETG+ product page. Heated bed required. Dry at 60 °C for >8 h. Heat resistant to 70–75 °C, UV resistant.

Source: eSUN

Summarized from the linked source. Always test on scrap before production runs.