High Speed Matte PETG on Any (brand filament profile)
officialTest on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
Any (brand filament profile)
Filament brand
SUNLU
Filament type
High Speed Matte PETG
Slicer
OrcaSlicer / Bambu Studio / PrusaSlicer
Nozzle size
0.4 mm
Nozzle temp
205–215 °C @ 50–100 mm/s; 240–250 °C @ 100–300 mm/s; 260–270 °C @ 300–600 mm/s
Bed temp
60–70 °C (with glue); 70–80 °C heated bed needs no glue
Speed
50–600 mm/s
Notes
Official SUNLU product page. Settings table lists 240–250 °C and 260–270 °C both at 100–200 mm/s, while the summary gives 100–300 and 300–600 mm/s. Dry at 50 °C; keep below 20% RH. SUNLU warns the higher-flow formula strings and oozes more easily when damp.
Source: SUNLU