High Speed PLA (HS-PLA) on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

SUNLU

Filament type

High Speed PLA (HS-PLA)

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

190–210 °C @ 50–150 mm/s; 210–230 °C @ 150–300 mm/s; 230–260 °C @ 300–600 mm/s

Bed temp

50–60 °C (summary); 65–75 °C with glue (settings table)

Speed

< 600 mm/s (flow up to 30 mm³/s)

Notes

Official SUNLU product page. Drying 65 °C for 8 h in a blast oven. SUNLU says overhangs under 70° need no supports.

Source: SUNLU

Summarized from the linked source. Always test on scrap before production runs.