Silk PLA+ 2.0 on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

SUNLU

Filament type

Silk PLA+ 2.0

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

205–215 °C @ 50–100 mm/s; 215–235 °C @ 100–200 mm/s

Bed temp

50–60 °C

Speed

50–200 mm/s

Retraction

Retraction speed 30–40 mm/s

Notes

Official SUNLU Silk PLA+ 2.0 spec table (tensile 51±4 MPa, HDT 57±3 °C, density 1.25 g/cm³).

Source: SUNLU

Summarized from the linked source. Always test on scrap before production runs.