PETG 2.0 on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

SUNLU

Filament type

PETG 2.0

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

230–240 °C @ 50–100 mm/s; 240–270 °C @ 100–200 mm/s

Bed temp

70–80 °C

Speed

50–200 mm/s

Retraction

Retraction speed 30–40 mm/s

Notes

Official SUNLU PETG 2.0 spec table (low-moisture-absorption formula; HDT 71±4 °C, density 1.22 g/cm³).

Source: SUNLU

Summarized from the linked source. Always test on scrap before production runs.