High Speed PLA+ 2.0 on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

SUNLU

Filament type

High Speed PLA+ 2.0

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

200–215 °C @ 50–150 mm/s; 215–230 °C @ 150–300 mm/s

Bed temp

50–60 °C

Speed

50–300 mm/s (rated up to 600 mm/s)

Retraction

Retraction speed 30–40 mm/s

Notes

Official SUNLU HS PLA+ 2.0 spec table (MFI 10.2±3 g/10 min, density 1.27 g/cm³).

Source: SUNLU

Summarized from the linked source. Always test on scrap before production runs.