Any (brand filament profile) / PolyMax PETG

PolyMax PETG on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

PolyMax PETG

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

230–240 °C

Bed temp

70–80 °C

Speed

30–50 mm/s

Layer height

0.1 mm layers, 3 shells, 20% infill, 4 top/bottom

Retraction

Direct drive 3 mm @ 40 mm/s; Bowden 1 mm @ 20 mm/s (as listed)

Cooling

Fan off (product page: off–20%)

Notes

Polymaker PolyMax PETG print-information sheet and product page. Brim for adhesion. Dry 65 °C for 6 h only if it has absorbed moisture. Polymaker tips: keep max volumetric at 15 mm³/s or lower; raise to 240 °C if layers split with the fan off.

Source: Polymaker

Summarized from the linked source. Always test on scrap before production runs.