Any (brand filament profile) / PolyMax PLA

PolyMax PLA on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

PolyMax PLA

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm (prints well on 0.2 mm)

Nozzle temp

190–230 °C (220–230 °C at 15 mm³/s)

Bed temp

25–60 °C

Chamber / enclosure

Not needed

Speed

50–200 mm/s; max volumetric 15 mm³/s

Retraction

1–3 mm @ 20–40 mm/s

Cooling

Fan on, full

Notes

Polymaker wiki (functional PLA page). Build surface PC or textured PEI (glue when needed). Supports: PolySupport or PolyDissolve S1. Dry 55 °C for 6 h.

Source: Polymaker

Summarized from the linked source. Always test on scrap before production runs.