Any (brand filament profile) / PolyLite PLA / PLA Pro / PLA-CF and PolyLite PETG (print tips)

PolyLite PLA / PLA Pro / PLA-CF and PolyLite PETG (print tips) on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

PolyLite PLA / PLA Pro / PLA-CF and PolyLite PETG (print tips)

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm (hardened for PLA-CF)

Nozzle temp

PLA Pro / PLA-CF: 220–230 °C when printing at 15 mm³/s; PETG: up to 240 °C if layers split

Speed

Max volumetric 15 mm³/s (PLA, PLA Pro, PLA-CF, PETG)

Cooling

PLA: fan full; PETG: fan off or very low

Notes

Polymaker wiki material print tips. Panchroma Silk new formula prints up to 250 mm/s while keeping shine (slow the outer wall a bit); no glitter/sparkle below 0.4 mm nozzle. Polymaker ASA: preheat bed 90–100 °C for 10 min in an enclosure.

Source: Polymaker

Summarized from the linked source. Always test on scrap before production runs.