Any (brand filament profile) / PETG / ASA (general by material type)

PETG / ASA (general by material type) on Any (brand filament profile)

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

PETG / ASA (general by material type)

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

PETG 220–260 °C (230–240 optimal); ASA 240–260 °C

Bed temp

PETG 65–90 °C; ASA 90–110 °C; PLA 50–60 °C

Chamber / enclosure

ASA: enclosure required

Speed

PETG ≤ 60 mm/s print, 120 mm/s travel

Retraction

PLA 1–2 mm direct drive / 2–5 mm Bowden @ 30–80 mm/s

Cooling

PLA 100% (off first 0.5 mm); PETG 30–50%; ASA 10–25%

Notes

Polymaker wiki printing tips by material type. PLA min layer time ≥3 s. Wait for textured PEI to cool fully before removing PET-GF/PET-CF parts. ASA supports: HIPS or breakaway, interface density 75–90%.

Source: Polymaker

Summarized from the linked source. Always test on scrap before production runs.