Any (brand filament profile) / Polymaker ASA

Polymaker ASA on Any (brand filament profile)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (brand filament profile)

Filament brand

Polymaker

Filament type

Polymaker ASA

Slicer

OrcaSlicer / Bambu Studio / PrusaSlicer

Nozzle size

0.4 mm

Chamber / enclosure

Elevated chamber temperature recommended at high speed

Speed

Up to 200 mm/s (16 mm³/s max volumetric) on direct-drive, high-flow printers

Layer height

0.2 mm (basis for the rating)

Notes

Polymaker wiki updated material printing parameters: PolyLite ASA was renamed Polymaker ASA with higher speed ratings, same formula. Speeds assume a 0.4 mm nozzle at 0.2 mm layers; reduce linear speed for bigger nozzles or layers.

Source: Polymaker

Summarized from the linked source. Always test on scrap before production runs.